SOP: Work at height from a MEWP

Bucket truck work at the top of a pole.

Learning Track · Module 10: SOPs · Step 78 of 101

Showing content for Europe. Change the region at the top of the page.

Who: trained operator and a ground personRules: Europe: EN 280, IPAF training common Middle East: IPAF training common, authority HSE rules South Asia: project HSE plan, maker's instructions USA: ANSI/SAIA A92 series, OSHA

1. Check the location for overhead lines, trees, and traffic.
2. Set up traffic management. Mark an exclusion zone under the platform.
3. Do the daily machine check. Make sure the periodic inspection is in date.
4. Set up on firm, level ground with outriggers on pads.
5. Check the wind speed. Stop above the maker’s limit.
6. Clip the harness lanyard to the basket anchor point before you lift.
7. Secure tools and parts in the basket.
8. The ground person stays at the ground controls.

Warning

Summer midday work bans apply to outdoor work in several GCC countries. Plan high work for early morning or night, and follow heat stress rules.

Warning

Do not work at height in rain, lightning, or strong monsoon winds. Plan for heat stress in summer.

Sources

1. EN 280 Mobile elevating work platforms
2. ANSI/SAIA A92.22 and A92.24 (safe use and training)
3. IPAF operator guidance

Changes: 30 October 2026: First publication: guides for Europe, the Middle East, South Asia, and the USA; failure library; tender clause library; comparisons; tools; downloads. See the changelog. Found a mistake? Report it.

Mark completeOpen in the Learning Track

PreviousSOP: Traffic management at a work siteNextSOP: Replace a luminaire, driver, or node